PICcoder.co.uk Forum  


Post a new message in "Networking / Ethernet"
Name:
Subject:
This image contains a scrambled text, it is using a combination of colors, font size, background, angle in order to disallow computer to automate reading. You will have to reproduce it to post on my homepage Enter what you see: *
tips: hit Reload page before writing a text if you have difficulty reading characters in image
topic icon:
no
boardcode:
 Colour:  Size:   Close all tags
Message:

emoticons
B) ;) :) :P
:laugh: :ohmy: :sick: :angry:
:blink: :( :unsure: :kiss:
:woohoo: :lol: :silly: :pinch:
:side: :whistle: :evil: :S
:blush: :cheer: :huh: :dry:

Topic History of: ENC28J60
Max. showing the last posts - (Last post first)
Author Message
Ian You don't have to use mag jack for the enc, most T-Base ethernet transformers will do, with and ethernet socket. Obviously using a magjack or similar with the magnetics and socket integrated decreases the required board space.



There is an issue with the current silicon revisions which destablize the SPI bus if you use a low speed clock, see the errata. As far as i remember if you use a 40Mhz clock it is fine, or if you use the same clock to drive both the enc and the pic.



If you put the enc part of the circuit together without the pic, 1 led indicates the cable is connected and the other flashes when data is passed.



I haven't tried measuring the Tpin and Tout pins but I expect with a good scope you can observe the signal.



Hope this helps,

Ian
AR Hello!

I am from germany! must i use a Mag Jack for enc28j60?

the clock of the PIC must it more than 10 MHz?

Is there any LED blinking on ENC28J60 when connecting with ethernet.

can i meassure the signal Tpin and Tpout? when yes what do they show ?

Joomlaboard Forum Component 1.1.2 Stable
Two Shoes M-Factory