|
|
|
how to get start with ENC28J60?
|
|
Date: 2006/06/15 09:18
|
By: Chen
|
Status: User
|
|
|
Karma: 0
|
|
| Posts: 2 |   |
|
|
Hi all,
I found on google this fantastic place. Thank you all moderators.
I have just taken a look through the datasheet of ENC28J60. I need to establish a simple connection by using this object with PIC18F controlloer using the UNICAST UDP, no webpage required.
I did work with PIC18F for some time, but am quite new to the ethernet controller and got a tight schedule. Does anyone know if there is a quick start on how to use the microchip TCP/IP stack with ENC28J60? Or, it is anyhow essential to read through the source code of the stack?
Thank you very much!
Chen
|
|
|
|
|
|
Re:how to get start with ENC28J60?
|
|
Date: 2006/06/15 10:16
|
By: Ian
|
Status: Moderator
|
|
|
Karma: 5
|
|
| Posts: 85 | |
|
|
Hi Chen,
The article on Ethernet is a good place to start.
As to the udp broadcast I think the best place to start may be modifying the anounce function. This sends a udp broadcast with the IP in, each time a new IP is detected.
Hope this helps.
Ian
|
|
|
|
|
|
Re:how to get start with ENC28J60?
|
|
Date: 2006/06/16 19:55
|
By: Chen
|
Status: User
|
|
|
Karma: 0
|
|
| Posts: 2 | |
|
|
Hi Ian,
You are great! I found your article on building the start-up stuff using the ENC28J60 in the "Articles" section. That's, as I suppose, what I am exactly looking for.
Chen
|
|
|
|
|
|
Re:how to get start with ENC28J60?
|
|
Date: 2006/06/16 21:32
|
By: Ian
|
Status: Moderator
|
|
|
Karma: 5
|
|
| Posts: 85 | |
|
|
The article isn't perfect. There are a number of instabilities in the silicon. You really have to run the PIC at 40Mhz to get the ENC to work properly. There are instabilities in the ENC silicon.
Ian
|
|
|
|
